Product Specifications – Bare Co B6130

• Brand: Bare Co

• Part Number: B6130

• Product Type: Tractor & machinery enamel paint

• Colour: Gloss Black

• Volume: 4 Litres

• Finish: High Gloss Enamel

• Application Method: Spray or brush

• Surface Type: Prepared metal surfaces

• Coverage: Approx. 8–12m² per litre (depending on surface & application)

• Drying Time: Touch dry approx. 2–4 hours (conditions dependent)

• Recoat Time: 12–24 hours (conditions dependent)

• Durability: Weather-resistant & rust-protective coating

• Suitable For: Tractors, implements & agricultural machinery

• Use: Restoration, repainting & refurbishment

• Condition: New

How to Prepare a Tractor for Painting – Complete Restoration Guide

Proper preparation is the key to achieving a professional, factory-quality finish when repainting your tractor. Whether you're restoring a Ferguson TE20, Massey Ferguson MF35, Ford 3000, or any classic agricultural machine, correct surface preparation ensures:

• Strong paint adhesion

• Smooth, even coverage

• Long-lasting durability

Follow this step-by-step tractor painting preparation guide for the best results.

1. Strip & Disassemble Where Possible

For a professional finish, remove as many components as practical before painting.

Remove:

• Bonnet panels

• Mudguards

• Wheels

• Small bolt-on components

• Badges and decals

• Lights and rubber parts

Tip: Label bolts and hardware for easy reassembly.

Disassembly allows for cleaner edges, better coverage, and a more professional overall result.

2. Degrease & Clean Thoroughly

Farm machinery naturally accumulates oil, grease, and dirt over time. Painting over contaminants will cause adhesion failure.

Steps:

• Use a quality degreaser to remove oil residue

• Wash down thoroughly

• Allow all surfaces to completely dry

A clean surface is essential before sanding or applying primer.

3. Remove Rust & Old Paint

Rust and loose paint must be fully removed to prevent future peeling or corrosion.

Depending on condition:

• Wire brush or mechanical sanding for light rust

• Flap discs for heavier corrosion

• Sandblasting for full restorations

Remove all loose paint and corrosion before moving to the next stage.

4. Sand for Proper Adhesion

Sanding creates a mechanical key for primer and enamel to bond properly.

Recommended:

• Medium grit sandpaper (120–240 grit)

• Smooth out rough areas

• Feather edges around repairs

Proper sanding ensures a smooth, uniform surface ready for primer.

5. Apply Primer

Primer improves paint adhesion and provides corrosion resistance — it is essential for long-term durability.

Best practice:

• Use a suitable metal primer

• Apply even coats

• Allow full curing time

• Lightly sand between coats if required

Skipping primer is one of the most common restoration mistakes.

6. Prepare Your Paint

When using tractor enamel paint:

• Stir thoroughly before use

• Thin with appropriate paint thinners if spraying

• Use correct spray gun settings or high-quality brushes

Available Colours:

• Ferguson Stoneleigh Grey

• Massey Ferguson Red

• Ford Blue (Early & Late)

• 4L & 20L Paint Thinners

Using the correct thinner and mixing ratios ensures optimal flow and finish.

7. Apply Paint in Even Coats

Achieve a factory-style finish by applying:

• Multiple light coats (not one heavy coat)

• Proper flash-off time between coats

• Paint in low humidity, clean conditions

Avoid windy or dusty environments that can contaminate wet paint.

8. Allow Proper Curing Time

• Follow manufacturer drying times

• Avoid handling parts too soon

• Reassemble carefully once fully cured

Rushing curing time can damage the finish and reduce durability.

Common Tractor Painting Mistakes to Avoid

• Painting over grease or contamination

• Skipping primer

• Applying heavy coats

• Failing to remove rust completely

• Painting in windy or dusty environments

Avoiding these mistakes dramatically improves your final result.

Products You May Need

• Tractor enamel paint

• Paint thinners (4L & 20L)

• Metal primer

• Sandpaper & wire brushes

• Spray equipment

• Replacement badges & decals

Why Proper Preparation Matters

Good preparation:

• Improves paint adhesion

• Prevents peeling and rust

• Enhances gloss and finish

• Increases restoration value

• Delivers long-lasting agricultural durability

A well-prepared tractor not only looks better — it lasts longer and maintains its value.